Specifications

5-141
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show telephony-service ephone-dn
show telephony-service ephone-dn
To display the Cisco IP phone destination number output of the Cisco IOS Telephony Service router, use
the show telephony-service ephone-dn command in EXEC mode.
show telephony-service ephone-dn
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Examples The following is sample output from the show telephony-service ephone-dn command:
Router# show telephony-service ephone-dn
ephone-dn 1
number 5001
huntstop
ephone-dn 2
number 5002
huntstop
call-forward noan 5001 timeout 8
ephone-dn 3
number 5003
huntstop
ephone-dn 4
number 5004
huntstop
Table 5-8 provides an alphabetic listing of the command fields in the sample output.
Release Modification
12.1(5)YD This command was introduced on the following platforms:
Cisco 2600 series and Cisco 3600 series multiservice routers, and
Cisco IAD2420 series IADs.
12.2(2)XT This command was implemented on the Cisco 1750 and
Cisco 1751 multiservice routers.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.