Specifications

5-136
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show telephony-service all
Related Commands
dialplan-pattern Dial-plan pattern is set to expand the abbreviated extension
numbers to fully qualified E.164 numbers.
ephone Cisco IP phone.
ephone-dn Cisco IP phone directory number.
huntstop Huntstop is set.
ip source address IP address used by Cisco IP phones to register with the router for
service.
keepalive The IP phone keepalive period in seconds.
mac-address MAC address.
max-ephones Maximum numbers of Cisco IP phones.
max-dn Maximum directory numbers.
number Cisco IP phone number.
port The TCP port number used by Cisco IP phones to communicate
with the router.
pots Plain old telephone service (POTS) dial peer set.
station-id number The number used for caller ID purposes when calls are made using
the line.
speed-dial Speed-dial is set.
timeout Timeout is set.
timeout ringing The maximum amount of time in seconds that the phone is allowed
to ring before the call is disconnected.
transfer-pattern Transfer pattern is set to allow transfer of calls to a specified
number.
type Not applicable; unused.
voicemail A voice-mail (speed-dial) number is set.
voice-port (Virtual) voice port designator.
Table 5-5 show telephony-service all Field Descriptions
Field Description
Command Description
show
telephony-service
dial-peer
Displays Cisco IP phone dial peers of the Cisco IOS Telephony Service
router.
show
telephony-service
voice-port
Displays the virtual voice port configuration of the Cisco IOS Telephony
Service router.