Specifications

5-133
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show telephony-service admin
show telephony-service admin
To display the username and password association of the local administrator of the Cisco IOS Telephony
Service router, use the show telephony-service admin command in EXEC mode.
show telephony-service admin
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Examples The following is sample output from the show telephony-service admin command:
Router# show telephony-service admin
admin_username Admin
admin_password word
edit DN through Web: enabled.
edit TIME through web: enabled.
assign IP Address through Web: disabled.
Related Commands
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.
Command Description
show
telephony-service all
Displays the detailed configuration of all the Cisco IP phones.
show
telephony-service
dial-peer
Displays Cisco IP phone dial peers of the Cisco IOS Telephony Service
router.
show
telephony-service
ephone-dn
Displays Cisco IP phone destination number output of the Cisco IOS
Telephony Service router.
show
telephony-service
voice-port
Displays the virtual voice-port configuration of the Cisco IOS Telephony
Service router.