Specifications

5-128
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show ephone-dn
Related Commands
No Interface Down Failure State of the interface.
NONE DN is not assigned with any MWI type.
Noise Regeneration Not applicable to the Cisco IP phone.
Non-Linear Processing Not applicable to the Cisco IP phone.
Operational State Operational state of the voice port.
Out Attenuation Not applicable to the Cisco IP phone.
Playout-delay Maximum Not applicable to the Cisco IP phone.
Playout-delay Mode Not applicable to the Cisco IP phone.
Playout-delay Nominal Not applicable to the Cisco IP phone.
Port Port number for this interface associated with the voice interface
card.
Region Tone Not applicable to the Cisco IP phone.
Ringing Time Out Ringing time out in seconds.
Station name Station name.
Station number Station number.
Slot Slot used in the voice interface card for this port.
SUSBCRIBED Registered with the MWI server.
Sub-unit Subunit used in the voice interface card for this port.
Type of VoicePort Indicates the voice port type.
VAD Voice activity detection.
Voice card specific Info Information specific to the voice card.
VPM STATE State indication for the voice port module (VPM) software
component.
VTSP STATE State indication for the voice telephony service provider (VTSP)
software component.
Wait Release Time Out The time in seconds that a voice port stays in the call-failure state
while the router sends a busy tone, reorder tone, or an
out-of-service tone to the port.
Table 5-3 show ephone-dn Field Descriptions
Field Description
Command Description
show ephone Displays Cisco IP phone output.