Specifications

5-125
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show ephone
Table 5-2 provides an alphabetic listing of the command fields in the sample output.
Related Commands
Table 5-2 show ephone summary Field Descriptions
Field Description
activeLine Indicates the line (button) on the phone that is in use. Zero indicates
that no line is in use
debug If set to 1, indicates that debug for the phone is enabled; otherwise,
it is set to 0.
ephone-1 Cisco IP phone tag number.
IP Assigned IP address of the Cisco IP phone.
keepalive Number of keepalive messages received from the IP phone by the
router.
Mac MAC address.
mediaActive If set to 1, indicates that an active conversation is going on; other-
wise, it is set to 0.
offhook If set to 1, indicates that the phone is off the hook.
REGISTERED Indicates that the phone is active and registered. Alternatives states
are UNREGISTERED (indicating that the connection to the
Cisco IP phone was closed in a normal manner) and DECEASED
(indicating that the connection to the Cisco IP phone was closed
because of a keepalive timeout).
reset Pending reset.
reset_sent Request for reset sent to the Cisco IP phone.
ringing If set to 1, indicates that the Cisco IP phone’s ringer is turned on
and the phone is ringing; otherwise, it is set to 0.
sp1 Speed-dial 1 set to a directory number.
sp2 Speed-dial 2 set to a directory number.
TCP socket Indicates the TCP socket number used to communicate with the
Cisco IP phone. This can be correlated with the output of various
other debug and show commands.
Telecaster model number Indicates the type and model of the IP phone. This information is
received from the phone during its registration with the router.
Command Description
show ephone-dn Displays the Cisco IP phone destination number.
show ephone-dn summary Displays summary of the Cisco IP phone destination
numbers.
show telephony-service Displays the detailed configuration of all Cisco IP phones.