Specifications

5-123
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show ephone
Table 5-1 show ephone Field Descriptions
Field Description
Active Call An active call is in progress.
activeLine Indicates the line (button) on the phone that is in use. Zero indicates
that no line is in use.
button 1 : dn 1 Shows the directory number (DN) tag number associated with the
phone button.
bytes Total number of voice data bytes sent or received by the
Cisco IP phone.
debug If set to 1, indicates that debug for the phone is enabled; otherwise,
it is set to 0.
DP tag Dial-peer tag for the destination-pattern matching the specified
telephone number.
dual_line Indicates that the dual telephone line feature available on sin-
gle-line Cisco IP phones (the Cisco 7905 or Cisco 7910, for
example) has been activated.
ephone-1 Cisco IP phone tag number.
IDLE The state of the DN is idle.
IP Assigned IP address of the Cisco IP phone.
Jitter The amount of variation (in milliseconds) of the time interval
between voice packets received by the Cisco IP phone.
keepalive Number of keepalive messages received from the Cisco IP phone
by the router.
Latency The estimated playout delay for voice packets received by the
Cisco IP phone.
line 1 Indicates which line on the IP phone is associated with the specified
telephone number.
Lost Number of voice packets lost, as calculated by the Cisco IP phone,
based on examining voice packet timestamp and sequence numbers
during playout.
Mac MAC address.
max_line Indicates the maximum number of lines that may be assigned to the
Cisco IP phone in question.
mediaActive If set to 1, indicates that an active conversation is going on; other-
wise, it is set to 0.
number The telephone number associated with the Cisco IP phone button
and its DN tag.
offhook If set to 1, indicates that the Cisco IP phone is off the hook.
paging Indicates the paging group to which the Cisco IP phone has been
assigned.