Specifications

5-121
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show ephone
Usage Guidelines The show ephone command displays statistical information for registered and unregistered
Cisco IP phones. If a MAC address is not specified, all phones that can be identified by the Cisco IOS
Telephony Service router are displayed. This command includes several keywords to enable you to get
different types of output specific to your needs.
Examples The following is a sample output from the show ephone command:
Router# show ephone
ephone-1 Mac:0003.E3E7.F627 TCP socket:[1] activeLine:1 REGISTERED
mediaActive:1 offhook:1 ringing:0 reset:0 reset_sent:0 debug:0
IP:10.0.0.51 50570 Telecaster 7940 keepalive 49
button 1: dn 1 number 3001 CONNECTED
Active Call on DN 1:3001 10.0.0.51 31808 to 1.2.159.100 22708
Tx Pkts 452 bytes 41584 Rx Pkts 452 bytes 41584 Lost 0
Jitter 0 Latency 0
ephone-2 Mac:0030.94C3.E1A8 TCP socket:[2] activeLine:1 REGISTERED
mediaActive:1 offhook:1 ringing:0 reset:0 reset_sent:0 debug:0
IP:1.2.159.100 50942 Telecaster 7960 keepalive 78
button 1: dn 2 number 3002 CONNECTED
Active Call on DN 2:3002 1.2.159.100 22708 to 10.0.0.51 31808
Tx Pkts 452 bytes 41584 Rx Pkts 452 bytes 41584 Lost 0
Jitter 0 Latency 0
ephone-3 Mac:0030.94C3.F946 TCP socket:[-1] activeLine:0 UNREGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:10.2.1.2 52163 Telecaster 7960 keepalive 59
ephone-4 Mac:0030.94C3.F43A TCP socket:[-1] activeLine:0 UNREGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:10.2.1.1 51768 Telecaster 7960 keepalive 59
The following is a sample output from the show ephone mac-address command for the Cisco IP phone
with the MAC address 0030.94C3.F43A:
Router# show ephone 0030.94c3.f43a
ephone-3 Mac:0030.94C3.F43A TCP socket:[3] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:1.5.81.13 Telecaster 7960 keepalive 28
button 1: dn 3 number 5003 IDLE
button 2: dn 5 number 5005 IDLE
button 3: dn 6 number 5006 IDLE
speed dial 1:3005
speed dial 2:3006
The following is a sample output from the show ephone dn dn-tag command:
Router# show ephone dn 5
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.
Release Modification