Specifications

5-120
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show ephone
show ephone
To display Cisco IP phone output, use the show ephone EXEC command.
show ephone [mac-address | summary | registered | unregistered | 7910 | 7940 | 7960 | ringing |
offhook | dn dn-tag | remote | telephone-number phone-number]
Command Modes
EXEC
Command History
mac-address (Optional) Specifies the MAC address of the Cisco IP phone.
summary (Optional) Displays summary information for all Cisco IP phones regis-
tered with the Cisco IOS Telephony Service router.
registered (Optional) Displays status information for any Cisco IP phones that are
currently registered with the Cisco IOS Telephony Service router.
unregistered (Optional) Displays status information for all unregistered Cisco IP phones.
7910 (Optional) Displays information about any Cisco 7910 IP Phones registered
with the Cisco IOS Telephony Service router.
7940 (Optional) Displays information about any Cisco 7940 IP Phones registered
with the Cisco IOS Telephony Service router.
7960 (Optional) Displays information about any Cisco 7960 IP Phones registered
with the Cisco IOS Telephony Service router.
ringing (Optional) Displays status information for all Cisco IP phones registered
with the Cisco IOS Telephony Service router that are currently in ringing
mode.
offhook (Optional) Displays a list of Cisco IP phones that are currently engaged or
off hook.
dn dn-tag (Optional) Cisco IP phone associated with a directory number tag.
remote (Optional) Displays status information about all non-local Cisco IP phones
(that is, phones that have no ARP entry).
telephone-number
phone-number
(Optional) Displays status information for a Cisco IP phone featuring the
specified telephone number.
Release Modification
12.1(5)YD This command was introduced on the following platforms:
Cisco 2600 series and Cisco 3600 series multiservice routers, and
Cisco IAD2420 series IADs.
12.2(2)XT This command was implemented on the Cisco 1750 and
Cisco 1751 multiservice routers.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.