Specifications

5-116
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
reset (ephone)
reset (ephone)
To reset the Cisco IP phones in ephone configuration mode, use the reset command in ephone
configuration mode.
reset
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Ephone configuration
Command History
Usage Guidelines The reset command does not have a no form.
The reset command resets the Cisco IP phone in ephone configuration mode.
The reset command does not have a no form.
Examples The following example shows how to reset the Cisco IP phones:
Router(config)# ephone 1
Router(config-ephone)# reset
Release Modification
12.1(5)YD This command was introduced on the following platforms: Cisco 2600
series and Cisco 3600 series multiservice routers, and Cisco IAD2420
series IADs.
12.2(2)XT This command was implemented on the Cisco 1750 and
Cisco 1751 multiservice routers.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.