Specifications

5-109
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
pattern ext-to-ext no-answer (vm-integration)
Usage Guidelines The pattern ext-to-ext no-answer command is used to configure the sequence of DTMF digits passed
to a voice-mail system attached to the Cisco IOS Telephony Service router through one or more voice
ports. When a call is routed to the voice-mail system by call forward on no-answer from an IP phone
attached to the Cisco IOS Telephony Service router, the voice-mail system expects to receive a sequence
of digits identifying the mailbox associated with the forwarding phone together with digits that identify
the extension number of the calling IP phone.
Although it is unlikely that you will use multiple instances of the CGN, CDN, or FDN keyword in a
single command line, it is permissible to do so.
Examples The following example sets the DTMF pattern for a local call forwarded on no-answer to the voice-mail
system:
Router(config) vm-integration
Router(config-vm-integration) pattern ext-to-ext no-answer 5 FDN * CGN *
Related Commands Command Description
pattern direct Configures the DTMF digit pattern forwarding necessary to activate the
voice-mail system when the user presses the messages button on the phone.
pattern ext-to-ext busy Configures the DTMF digit pattern forwarding necessary to activate the
voice-mail system once an internal extension fails to connect to an
extension and the call is forwarded to voice mail.
pattern trunk-to-ext
busy
Configures the DTMF digit pattern forwarding necessary to activate the
voice-mail system once an external trunk call reaches a busy extension and
the call is forwarded to voice mail.
pattern trunk-to-ext
no-answer
Configures the DTMF digit pattern forwarding necessary to activate the
voice-mail system when an external trunk call reaches an unanswered
extension and the call is forwarded to voice mail.
vm-integration Enters voice-mail integration mode and enables voice-mail integration with
DTMF and analog voice-mail system.