Specifications

5-86
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
mwi expires (telephony-service)
mwi expires (telephony-service)
To set the expire timer for registration for either the client or server, use the mwi expires command in
telephony-service configuration mode. To disable the expire timer for a subscription, use the no form of
this command.
mwi expires seconds
no mwi expires seconds
Syntax Description
Defaults Default is set to 86,400 seconds (24 hours).
Command Modes Telephony-service configuration
Command History
Usage Guidelines The mwi expires command sets the expire timer for registration for either the client or server.
Examples The following example shows how to set the message waiting indication (MWI) expires time to 10
seconds:
Router(config)# telephony-service
Router(config-telephony-service)# mwi expires 10
Related Commands
seconds Expire time set in seconds. The default is set to 86,400 seconds (24 hours).
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series and Cisco 3600 series multiservice routers;
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.
Command Description
mwi relay
(telephony-service)
Enables the Cisco IOS Telephony Service router to relay MWI information
to remote Cisco IP phones.