Specifications

5-85
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
mwi (ephone-dn)
Router(config-ephone-dn) mwi on
The following example shows how to set message waiting indication to OFF:
Router(config)# ephone-dn 2
Router(config-ephone-dn) number 8001
Router(config-ephone-dn) mwi off
The following example shows how to set message waiting indication to ON-OFF for the primary and
secondary number, where the MWI information is embedded in the calling party number:
Router(config)# ephone-dn 3
Router(config-ephone-dn) number 8002 secondary 8003
Router(config-ephone-dn) mwi on-off
In the previous example, a call placed by the voice-mail system to 8002 turns on the MWI light for the
extension number indicated by the calling party number for the MWI call. A call placed to 8003 turns
off the MWI light.
The following example shows how to set message waiting indication to ON-OFF for the primary and
secondary number, where the MWI information is embedded in the called party number:
Router(config)# ephone-dn 20
Router(config-ephone-dn) number 8000*....*1 secondary 8000*....*2
Router(config-ephone-dn) mwi on-off
In the previous example, a call placed by the voice-mail system to 8000*5001*1 turns on the MWI light
for extension 5001. A call to 8000*5001*2 turns off the MWI light.
Related Commands Command Description
ephone-dn Enters ephone-dn configuration mode and configures the directory
numbers for the Cisco IP phone lines.
mwi expires Sets the expire timer for registration for either the client or server.
mwi sip (ephone-dn) Subscribes an extension in a Cisco IOS Telephony Service router to
receive MWI notification from a SIP MWI server.
mwi sip-server
(telephony-service)
Configures IP address and port for the external SIP-based MWI server.