Specifications

5-76
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
max-conferences (telephony-service)
max-conferences (telephony-service)
To set the maximum number of simultaneous three-party conferences supported by the router, use the
max-conferences command in telephony-service configuration mode. To return to the default
conferencing numbers, use the no form of this command.
max-conferences max-conference-numbers
no max-conferences max-conference-numbers
Syntax Description
Defaults The default is half of the maximum simultaneous three-party conferences numbers per platform.
Command Modes Telephony-service configuration
Command History
max-conference-numbers The maximum number of simultaneous three-party conferences
supported by the router. The maximum number of three-party
conferences is platform dependent:
• Cisco 1750—8
• Cisco 1751—8
• Cisco 2600 series—8
• Cisco 2600-XM series—8
• Cisco 3620—8
• Cisco 3640—8
• Cisco 3660—16
• Cisco 3725—16
• Cisco 3745—16
• Cisco IAD2420 series—8
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.