Specifications

5-69
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
load (telephony-service)
Examples The following example shows how to download the correct phone firmware for the specific
Cisco IP phones:
Note The filenames are case-sensitive.
Router(config)# telephony-service
Router(config-telephony-service)# load 7960-7940 P003E302
Router(config-telephony-service)# load 7910 P004E302
Router(config)# tftp-server flash:P003E302.bin
Router(config)# tftp-server flash:P004E302.bin
Note The .bin suffix is not required by the load command; however, the .bin suffix is required by the
tftp-server command.
The Cisco IP phone is updated with a different phone firmware only when the Cisco IP phone reboots.
Related Commands Command Description
ephone Enters ephone configuration mode to register Cisco IP phones.
ephone-dn Enters ephone-dn configuration mode and configures the directory numbers
for the Cisco IP phone lines.
telephony-service Enables Cisco IOS Telephony Service and enters telephony-service
configuration mode.
tftp-server Enables TFTP access to firmware files on the TFTP server so that the
Cisco IP phone can get the file.