Specifications

5-68
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
load (telephony-service)
load (telephony-service)
To download a new phone firmware on the Cisco IP phones, use the load command in telephony-service
configuration mode. To disable a new phone firmware on the Cisco IP phones, use the no form of this
command.
load {7960-7940 | 7910 | 7935} phone-load
no load {7960-7940 | 7910 | 7935} phone-load
Syntax Description
Defaults No default behavior or values.
Command Modes Telephony-service configuration
Command History
Usage Guidelines Use the load command to download a new phone firmware on the Cisco IP phones. You must enter this
command for each type of phone. The Cisco IP Phone 7960 and Cisco IP Phone 7940 have the same
phone firmware. The phone firmware should be downloaded on the HTTP server of the router.
Note When you enter the load command, you do not use the extension of the file, for example, .bin.
7960-7940 Specifies the IP phone firmware for Cisco IP Phone 7960 and
Cisco IP phone 7940.
7910 Specifies the IP phone firmware for Cisco IP phone 7910.
7935 Specifies the IP phone firmware for Cisco IP Conference Station 7935.
phone-load Specifies Cisco IP phone firmware.
Release Modification
12.1(5)YD This command was introduced on the following platforms:
Cisco 2600 series and Cisco 3600 series multiservice routers, and
Cisco IAD2420 series IADs.
12.2(2)XT This command was implemented on the Cisco 1750 and
Cisco 1751 multiservice routers.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.