Specifications

5-53
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
ephone
ephone
To enter the Ethernet phone (ephone) configuration mode, use the ephone command in global
configuration mode. To disable the ephone configuration mode, use the no form of this command.
ephone tag
no ephone tag
Syntax Description
Defaults No Cisco IP phone is configured.
Command Modes Global configuration
Command History
tag Number of the Ethernet phone tag. The maximum number is platform
dependent:
• Cisco 1750—24 Cisco IP phones
• Cisco 1751—24 Cisco IP phones
• Cisco 2600 series—24 Cisco IP phones
• Cisco 2600-XM series—24 Cisco IP phones
• Cisco 3620—24 Cisco IP phones
• Cisco 3640—48 Cisco IP phones
• Cisco 3660—48 Cisco IP phones
• Cisco 3725—48 Cisco IP phones
• Cisco 3745—48 Cisco IP phones
• Cisco IAD2420—24 Cisco IP phones
Release Modification
12.1(5)YD This command was introduced on the following platforms:
Cisco 2600 series and Cisco 3600 series multiservice routers, and
Cisco IAD2420 series IADs.
12.2(2)XT This command was implemented on the Cisco 1750 and
Cisco 1751 multiservice routers.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.