Specifications

5-51
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
dn-webedit (telephony-service)
dn-webedit (telephony-service)
To enable adding of directory numbers through a web interface, use the dn-webedit command in
telephony-service configuration mode. To disable this feature, use the no form of this command.
dn-webedit
no dn-edit
Syntax Description This command has no arguments or keywords.
Defaults dn-webedit command is disabled.
Command Modes Telephony-service configuration
Command History
Usage Guidelines The dn-webedit command enables adding of the directory through the Cisco IOS Telephony Service
web-based graphical user interface (GUI). If the dn-webedit command is enabled, the GUI administrator
can modify and assign the phone numbers associated with the Cisco IOS Telephony Service router. This
action may not be desirable in cases where the set of numbers used by the Cisco IOS Telephony Service
router are part of a larger telephone network. Disabling the dn-webedit command prevents the
administrator from allocating phone numbers and also prevents assignment of numbers that may already
be used elsewhere in the network.
Examples The following example shows how to enable editing of directory numbers through the web-based GUI
interface:
Router(config)# telephony-service
Router(config-telephony-service)# dn-webedit
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series and Cisco 3600 series multiservice routers,
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.