Specifications

5-47
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
dialplan-pattern (telephony-service)
dialplan-pattern (telephony-service)
To create a global prefix that can be used to expand the abbreviated extension numbers into fully
qualified E.164 numbers, use the dialplan-pattern command in telephony-service configuration mode.
To disable, use the no form of this command.
dialplan-pattern tag pattern extension-length length [no-reg]
no dialplan-pattern tag [pattern extension-length length]
Syntax Description
Defaults No default behavior or values.
Command Modes Telephony-service configuration
Command History
Usage Guidelines Directory numbers for the Cisco IP phones are expected to be entered in extension number format. The
extension number should be greater or equal to the extension length. Otherwise, the extension number
cannot be converted to a qualified E.164 number. The dialplan-pattern command creates a global prefix
that can be used to expand the abbreviated extension numbers to fully qualified E.164 numbers. The
tag Dial-plan string tag used before a ten-digit telephone number. The tag
number is from 1 to 5.
pattern Dial-plan pattern, such as the area code, the prefix, and the first one or two
digits of the extension number.
extension-length The number of extension digits.
length The number of extension digits. The range is from 1 - 32.
no-reg (Optional) Prevents the E.164 numbers in the dial-peer from registering to
the gatekeeper.
Release Modification
12.1(5)YD This command was introduced on the following platforms:
Cisco 2600 series and Cisco 3600 series multiservice routers, and
Cisco IAD2420 series IADs.
12.2(2)XT This command was implemented on the Cisco 1750 and
Cisco 1751 multiservice routers.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.