Specifications

5-43
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
debug mwi relay errors
debug mwi relay errors
To debug message waiting indication (MWI) relay errors, use the debug mwi relay errors command in
privileged EXEC mode. To disable debugging, use the no form of this command.
debug mwi relay errors
no debug mwi relay errors
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Usage Guidelines The debug mwi relay errors command provides a debug monitor display of any error messages when
MWI Relay Server (Cisco IOS Telephony Server) is trying to do MWI Relay to extensions on remote
Cisco IOS Telephony Service.
Examples The following examples show errors when MWI Relay Server tries to do a MWI Relay to extension
7004, but location of 7004 is not known to the MWI Relay Server:
Router# debug mwi relay errors mwi-relay error info debugging is on
Router#
01:46:48: MWI-APP: mwi_notify_status: No ClientID (7004) registered
Related Commands
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series and Cisco 3600 series multiservice routers,
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.
Command Description
debug mwi events Sets MWI relay events debugging for the Cisco IOS Telephony Service
router.
debug ephone mwi Sets MWI debugging for the Cisco IOS Telephony Service router.