Specifications

ManualsBrandsCisco ManualsComputer equipment2650 - 2650 Router

131

132

133

134

135

136

137

138

139

140

5-34

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

debug ephone pak

01:29:14: ***ph_xmit_ephone DN 3 tx_pkts 5770 dest=10.2.1.1 orig len=32

pakcopy=0 discards 27 ip_enctype 0 0 last discard: unsupported payload type

01:29:14: to_skinny_duration 130210 offset -30 last -40 seq 0 adj 0

01:29:14: IP: 45B8 003C 0866 0000 3F11 3F90 2800 0001 0A02 0101

01:29:14: TTL 63 TOS B8 prec 5

01:29:14: UDP: 07D0 6266 0028 0000

01:29:14: sport 2000 dport 25190 length 40 checksum 0

01:29:14: RTP: 8012 16AF 9170 6409 0E9F 0001

01:29:14: is_rtp:1 is_frf11:0 vlen:0 delta_t:160 vofr1:0 vofr2:0

scodec:11 rtp_bits:8012 rtp_codec:18 last_bad_payload 19

01:29:14: vencap FAILED

01:29:14: PROCESS SWITCH

01:29:15: %SYS-5-CONFIG_I: Configured from console by console

01:29:34: ***SkinnyPktIp DN 3 10.2.1.1 to 40.0.0.1 pkts 4880 FAST sw

01:29:34: from_skinny_duration 150910

01:29:34: nw 3BBC2A8 addr 3BBC2A4 mac 3BBC2A4 dg 3BBC2C4 dgs 2A

01:29:34: MAC: 1841 0800

01:29:34: IP: 45B8 0046 682E 0000 3E11 E0BD 0A02 0101 2800 0001

01:29:34: TTL 62 TOS B8 prec 5

01:29:34: UDP: 6266 07D0 0032 0000

01:29:34: sport 25190 dport 2000 length 50 checksum 0

01:29:34: RTP: 8012 55FF 0057 8870 3AF4 C394

01:29:34: RTP: rtp_bits 8012 seq 55FF ts 578870 ssrc 3AF4C394

01:29:34: PAYLOAD:

01:29:34: 1409 37C9 54DE 449C 3B42 0446 3AAB 182E

01:29:34: 56BC 5184 58E5 56D3 13BE 44A7 B8C4

01:29:34:

01:29:37: ***ph_xmit_ephone DN 3 tx_pkts 6790 dest=10.2.1.1 orig len=32

pakcopy=0 discards 31 ip_enctype 0 0 last discard: unsupported payload type

01:29:37: to_skinny_duration 153870 offset -150 last -40 seq 0 adj 0

01:29:37: IP: 45B8 003C 0875 0000 3F11 3F81 2800 0001 0A02 0101

01:29:37: TTL 63 TOS B8 prec 5

01:29:37: UDP: 07D0 6266 0028 0000

01:29:37: sport 2000 dport 25190 length 40 checksum 0

01:29:37: RTP: 8012 1AAF 9173 4769 0E9F 0001

01:29:37: is_rtp:1 is_frf11:0 vlen:0 delta_t:160 vofr1:0 vofr2:0

Related Commands Command Description

debug ephone detail Sets detail debugging for the Cisco IP phone.

debug ephone error Sets error debugging for the Cisco IP phone.

debug ephone keepalive Sets keepalive debugging for the Cisco IP phone.

debug ephone mwi Sets message waiting indication (MWI) debugging for the

Cisco IP phone.

debug ephone raw Provides raw low-level protocol debugging display for all SCCP.

debug ephone register Sets registration debugging for the Cisco IP phone.

debug ephone state Sets state debugging for the Cisco IP phone.

debug ephone statistics Sets statistics debugging for the Cisco IP phone.

show debugging Displays information about the types of debugging that are

enabled for your router.