Specifications

5-16
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
call-forward noan (ephone-dn)
Examples The following example shows how to set call forwarding of incoming calls to directory number 5005
when line 1, directory number 5001, does not answer. The timeout period before the call is forwarded
to the directory number 5005 is set for 10 seconds.
Router(config)# ephone-dn 1
Router(config-ephone-dn)# number 5001
Router(config-ephone-dn)# call-forward noan 5005 timeout 10
Related Commands Command Description
call-forward all Configures call forwarding for all the incoming calls on one of the lines of
a Cisco IP phone to another telephone.
call-forward busy Configures call forwarding to another number when the Cisco IP phone is
busy.
ephone Enters ephone configuration mode to register Cisco IP phones.
ephone-dn Enters ephone-dn configuration mode and configures the directory numbers
for the Cisco IP phone lines.