Specifications

5-10
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
button (ephone)
Examples The following example shows how to assign a button number on the phone to directory number tags:
Router(config)# ephone 1
Router(config-ephone)# button 1:1 2:4 3:16 4:19
Related Commands Command Description
ephone Enters ephone configuration mode to register Cisco IP phones.
ephone-dn Enters ephone-dn configuration mode and configures the directory numbers
for the Cisco IP phone lines.
telephony-service Enables Cisco IOS Telephony Service and enters telephony-service
configuration mode.
show ephone Displays Cisco IP phone output.