Specifications

5-8
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
application (ephone-dn)
application (ephone-dn)
To select the session-level application for each Cisco IP phone directory number, use the application
command in ephone-dn configuration mode. To disable this feature, use the no form of this command.
application application-name
no application application-name
Syntax Description
Defaults No default behavior or values.
Command Modes Ephone-dn configuration
Command History
Usage Guidelines The application command selects the session-level application for each Cisco IP phone directory
number. Use this command to assign a tool command language (TCL) interactive voice response (IVR)
application to the Cisco IP phone directory number (ephone-dn).
Examples The following example shows how to set the IVR application for directory number 1:
Router(config)# ephone-dn 1
Router(config-ephone-dn) application TCLIVR
Related Commands
application-name Selected interactive voice response (IVR) application name.
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series and Cisco 3600 series multiservice routers,
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.
Command Description
ephone-dn Enters ephone-dn configuration mode and configures the directory numbers
for the Cisco IP phone lines.