Installation guide

Upgrading System Memory in Cisco 2600 Series Routers

78-5125-04 B0

Closing the Chassis

Step 5 Reinstall the chassis on the wall, rack, desktop, or table.

Step 6 Reconnect all cables. If the router uses a DC power supply, switch the circuit breaker to the ON position.

Replacing the Chassis Cover on Cisco 2691

Step 1 Place the chassis bottom so the front panel is closest to you.

Step 2 Hold the cover so the tabs at the rear of the cover are aligned with the chassis bottom.

Step 3 Push the cover toward the rear, making sure that the cover tabs fit under the chassis back panel, and the

back panel tabs fit under the cover.

Slide the cover slightly to the left to lock the cover into position (See part 1 in Figure 17).

Figure 17 Replacing the Cisco 2691 Router Cover

Step 4 Lower the front of the cover onto the chassis (See part 2 in Figure 17).

62490