Installation guide

4-6
Cisco Access Router Manager Installation Guide
OL-3598-02
Chapter 4 Uninstalling the EM
Removing the EM Package and Associated Packages
Removing the EM Package and Associated Packages
You can selectively remove an EM package and all associated components using the install script with
the -r -all command. The -r -all command does not allow you to leave shared components on the system
(i.e., the EM package and all associated components are removed).
To remove an EM including the associated components using the install script:
Step 1 Ensure that you are logged in as a root user on the workstation where the EM and associated packages
you want to remove are installed.
Step 2 Perform one of the following, as appropriate:
a. Insert the Cisco 7000 Series Manager CD-ROM and make the CD-ROM area your working
directory by entering the following at a command prompt:
cd /cdrom/cdrom0
b. Navigate to the directory where the EM package exists by entering the following at a command
prompt:
cd CEMF_Root/bin
(Replace CEMF_ROOT with the name of the directory where Cisco EMF is installed.)
Step 3 Run the install script by entering the following:
./CAccessRouterMGRinstall -r -all
A list of all the packages installed appears in a terminal window. The options presented in the terminal
window includes Cisco EMF (Server or Client), Cisco EMF patches, and each EM (Server or Client)
installed (e.g., Cisco Access Router Manager). Typically EM packages do not required Cisco EMF
initialization, and such information appears beside the relevant option.
If an installed package contains dependencies to other installed packages, the following appears beside
the affected option(s):
[cannot be removed]
The following figure is an example of the terminal window displayed during an uninstall when the
Cisco EMF server package, Cisco EMF patches, and the Cisco Access Router Manager server package
are installed on a workstation.
REMOVE PACKAGE:
1) Cisco Element Manager Framework — Server [cannot be removed]
2) Cisco Access Router Manager Server — (CEMF Initialization Required)
3) CEMF Server 3.2 Patch 170006–12
4) CEMF Server 3.2 Patch 6.2 (190602-01)
q) Quit
Which package do you wish to remove? (Def:1) [?,q]
Tip Enter ? for help or q to quit.
Step 4 To uninstall a package, enter the appropriate option at the prompt.
The utility verifies the option selected and lists the packages to be uninstalled, including the EM
(C2636MGRmfor server package or C2636MGRc for client package) and associated packages. A
confirmation of the uninstall appears.