Installation guide

1-8
Cisco Access Router Manager Installation Guide
OL-3598-02
Chapter 1 Overview
Supported Objects
The following tables display the generic, ATM, and Ethernet modules supported by
Cisco Access Router Manager.
Table 1-2 Supported Generic Modules
Module Description
NM-2CE1U 2 Port Channelized E1/ISDN PRI, unbalanced
NM-1CE1U One-port Channelized E1/ISDN PRI, unbalanced
NM–2V 2 Voice/Fax interface card
NM–HDV–2T1–48 2 Port 48 channel T1 Voice/Fax interface card
NM–HDV–2E1–60 2 Port 60 channel E1 Voice/Fax interface card
VIC–2E/M 2 Port E&M Voice/Fax interface card
VIC–2FX0 2 Port Foreign Exchange Office (FXO) Voice/Fax interface card
VIC–2FXS 2 Port Foreign Exchange Station (FXS) Voice/Fax interface card
VWIC–2MFT–E1-D1 2 Port RJ–48 Multiflex Truck–E1 with drop and insert card
VWIC–2MFT–T1-D1 2 Port RJ–48 Multiflex Truck–T1 with drop and insert card
WIC–2T 2 Port High–Speed Serial WAN interface card
Table 1-3 Supported ATM /SONET Modules
Module Description
NM–1A–OC3MM 1 Port 155–Mbps multimode OC–3 ATM card
NM-4E1-IMA 4 Port E1 ATM network module with IMA
NM–4T1–IMA 4 Port T1 ATM with Inverse Multiplexing over ATM (IMA) card
Table 1-4 Supported Ethernet Modules
Module Description
NM–1FE–TX 1 10/100 Fast Ethernet card
NM–2FE2W 2 10/100 Ethernet 2 WAN card