Hardware manual

interface group-async
Interface Commands IR-115
interface group-async
To create a group interface that will serve as master, to which asynchronous interfaces can be
associated as members, use the interface group-async global configuration command. Use the no
form of the command to restore the default.
interface group-async unit-number
no interface group-async unit-number
Syntax Description
Default
No interfaces are designated as group masters.
Command Mode
Global configuration
Usage Guidelines
Using the interface group-async command, you create a single asynchronous interface to which
other interfaces are associated as members using the group-range command. This one-to-many
configuration allows you to configure all associated member interfaces by entering one command on
the group master interface, rather than entering this command on each individual interface. You can
create multiple group masters on a device; however, each member interface can only be associated
with one group.
Examples
The following example defines asynchronous group master interface 0:
interface group-async 0
Related Commands
You can use the master indexes or search online to find documentation of related commands.
group-range
member
unit-number The number of the asynchronous group interface being created.