Manualshelf

Hardware manual

ManualsBrandsCisco ManualsComputer equipment2525 - 2525 TR Router
21222324252627282930
local-lnm
IR-134
Cisco IOS Interface Command Reference
local-lnm
To enable Lanoptics Hub Networking Management of a PCbus Token Ring interface, use the
local-lnm interface configuration command. Use the no form of this command to disable Lanoptics
Hub Networking Management.
local-lnm
no local-lnm
Syntax Description
This command has no arguments or keywords.
Default
Management is not enabled.
Command Mode
Interface configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 10.3.
The Token Ring interface on the AccessPro PC card can be managed by a remote LAN manager over
the PCbus interface. At present, the Lanoptics Hub Networking Management software running on
an IBM compatible PC is supported.
Example
The following example enables Lanoptics Hub Networking Management:
local-lnm