Hardware manual

interface vg-anylan
IR-118
Cisco IOS Interface Command Reference
interface vg-anylan
Use the interface vg-anylan global configuration command to specify the interface on a
100VG-AnyLAN port adapter and enter interface configuration mode on Cisco 7200 series routers
and Cisco 7500 series routers.
interface vg-anylan slot/port-adapter/port (VIP cards in Cisco 7500 series routers)
interface vg-anylan slot/port (Cisco 7200 series routers)
Syntax Description
Default
No interfaces are specified.
Command Mode
Global configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3.
The 100VG-AnyLAN port adapter provides a single interface port that is compatible with and
specified by IEEE 802.12. The 100VG-AnyLAN port adapter provides 100 Mbps over Category 3
or Category 5 unshielded twisted-pair (UTP) cable with RJ-45 terminators, and supports
IEEE 802.3 Ethernet packets.
You configure the 100VG-AnyLAN port adapter as you would any Ethernet or Fast Ethernet
interface. The 100VG-AnyLAN port adapter can be monitored with the IEEE 802.12 Interface MIB.
Example
The following example specifies the 100VG-AnyLAN port adapter in the first port adapter in slot 1:
interface vg-anylan 1/0/0
Related Commands
You can use the master indexes or search online to find documentation of related commands.
frame-type
show interfaces vg-anylan
slot Refer to the appropriate hardware manual for slot and port
information.
port Refer to the appropriate hardware manual for slot and port
information.
port-adapter Refer to the appropriate hardware manual for information about
port adapter compatibility.