User guide

Installing the Cisco 2524 and Cisco 2525 Routers 3-9

Setting Up the Chassis

Wall-Mounting the Chassis

Use the smaller brackets (for use with a 19-inch rack) to wall-mount the chassis. The

smaller brackets provide the most stable position for the chassis.

Take the following steps to wall-mount the chassis:

Step 1 Attach the brackets as shown in Figure 3-12.

Figure 3-12 Attaching the Wall-Mount Brackets

Step 2 Attach the chassis assembly to the wall as shown in Figure 3-13, using screws and

anchors that you provide. We recommend the following:

• For the best support of the chassis and cables, attach the brackets so that the

screws align with a vertical wall stud.

• For the best ventilation of the chassis, mount the chassis with the power supply

and fan at the top.

Caution To prevent the chassis from pulling away from the wall when cables are attached,

align the brackets and screws with a vertical wall stud. (See Figure 3-13.) To ensure

adequate ventilation, make sure there is clearance between the router and the wall.

H1714

Input: 100-240VAC

Freq: 50/60 Hz

Current: 1.2-0.6A

Watts: 40W