User guide

3-20 Cisco 2524 and Cisco 2525 Router User Guide

Connecting to the Network

Take the following steps to connect the router to your WAN:

Step 1 If you have a 2-wire switched 56-kbps module, use a straight-through

RJ-11-to-RJ-11 cable to connect the RJ-11 port to an RJ-11 jack. (See

Figure 3-20.)

Figure 3-20 Connecting the 2-Wire Switched 56-kbps DSU/CSU Module to an

RJ-11 Jack

H5260

RJ-11 jack

SERIAL 1

SERIAL 0

BRI 0

RJ-11 port

Router

Straight-through

RJ-11 cable

2-WIRE

56K

DSU/CSU

TX LB