Specifications

Maintaining the Router B-11
Closing the Chassis
Caution To fit the two sections together, it may be necessary to work them together at one
end and then the other, working back and forth; however, use care to prevent bending the
chassis edges.
Figure B-5 Replacing the Chassis Cover
Step 3
When the two sections fit together snugly, turn the chassis so that the bottom is
facing up, with the front panel toward you.
Step 4 Replace the cover screw. (See Figure B-1.) Tighten the screw to no more than
8 or 9 inch/pounds of torque.
Step 5 Reinstall the chassis on the wall, rack, desktop, or table.
Step 6 Replace all cables.
H3560
FrontRear
Left end
toward you
Top section
Bottom section
A
B
C