Specifications

Installing the Router 3-17
Connecting to a Network
Step 4 Connect one end of each asynchronous/synchronous cable to the
asynchronous/synchronous ports (labeled SERIAL n (A/S)), and then connect the
other end to a CSU/DSU or asynchronous device. (See Figure 3-14.)
For asynchronous/synchronous port pinouts, refer to the appendix “Cable
Specifications.”
Figure 3-14 Connecting Asynchronous Serial Cables
SERIAL 2 (A/S)
SERIAL 3 (A/S)
10bT
ETHERNET 0
ACT
AUI
BRI 0
CONSOLE
AUX
SERIAL 4 (A/S)
SERIAL 0
SERIAL 5 (A/S)
SERIAL 1
SERIAL 6 (A/S)
SERIAL 7 (A/S)
SERIAL 8 (A/S)
LINK
PWR
SERIAL 9 (A/S)
Input: 100-240VAC
Freq: 50/60HZ
Current: 1.2-0.6 A
Watts: 40W
EIA/TIA-232,
EIA/TIA-449, V.35, X.21,
or EIA-530 connector
H5589
60-pin serial port
connector
Serial transition
cable
Router
CSU/DSU or
other DCE