Specifications

Installing the Router 3-15
Connecting to a Network
You can also connect the Token Ring port (RJ-45) to a Token Ring hub. If the
transmission rate of your Token Ring network is 4 Mbps, use a UTP cable to
connect the Token Ring port (RJ-45) to a Token Ring hub. If the transmission rate
of your Token Ring network is 16 Mbps, use a STP cable to connect the Token
Ring port (RJ-45) to a Token Ring hub.
Figure 3-12 Connecting the Token Ring Cable
SERIAL 4 (A/S)
SERIAL 0
SERIAL 5 (A/S)
SERIAL 1
SERIAL 6 (A/S)
SERIAL 2 (A/S)
SERIAL 7 (A/S)
SERIAL 3 (A/S)
SERIAL 8 (A/S)
UTP
ACT
BRI 0
CONSOLE
PWR
AUX
SERIAL 9 (A/S)
Input: 100-240VAC
Freq: 50/60HZ
Current: 1.2-0.6 A
Watts: 40W
TOKEN RING 0
H5591
Standard
IEEE 802.5
connector
Token Ring
port (DB-9)
Token Ring
lobe cable
(not supplied)
MAU
Router
IN-RING