Specifications

3-14 Cisco Multiport Router Hardware Installation and Configuration Guide
Connecting to a Network
Figure 3-11 Connecting Ethernet Transition Cables
Step 2 Connect the Token Ring port (DB-9) to a MAU. (See Figure 3-12.) To ensure
agency compliance with electromagnetic interference (EMI), make sure the cable
is shielded.
To thin
Ethernet
network
SERIAL 4 (A/S)
SERIAL 0
SERIAL 5 (A/S)
SERIAL 1
SERIAL 6 (A/S)
SERIAL 2 (A/S)
SERIAL 7 (A/S)
SERIAL 3 (A/S)
SERIAL 8 (A/S)
10BT
ETHERNET 0
ACT
AUI
BRI 0
CONSOLE
PWR
AUX
SERIAL 9 (A/S)
Input: 100-240VAC
Freq: 50/60HZ
Current: 1.2-0.6 A
Watts: 40W
H5590
Ethernet port
DB-15 connector
(with jackscrews
or slide-latch)
Router
To thin
Ethernet
network
Ethernet
AUI cable
(not supplied)
Transceiver
BNC connector
LINK