Specifications

3-6 Cisco Multiport Router Hardware Installation and Configuration Guide
Setting Up the Chassis
Installing in a Rack
After the brackets are secured to the chassis, you can rack-mount it. Using the screws you
provide, attach the chassis to the rack as shown in Figure 3-7.
Figure 3-7 Attaching the Chassis to a Rack—Rear Panel Forward
Wall-Mounting the Chassis
Use the smaller brackets (for use with a 19-inch rack) to wall-mount the chassis. The
smaller brackets provide the most stable position for the chassis.
Take the following steps to wall-mount the chassis:
Step 1 Attach the brackets as shown in Figure 3-8.
Figure 3-8 Attaching the Wall-Mount Brackets
H6331
19 in.
brackets
24 in.
brackets
H1704
Input: 100-240VAC
Freq: 50.60 Hz
Current: 1.2-0.6A
Watts: 40W
0
1
Note: The second bracket attaches to the other side of the chassis.