User guide

3-6 Cisco 2500 Series Access Server User Guide
Rack-Mounting the Chassis
Telco Rack
To install the chassis in a 19-inch, center-mount telco rack, attach the rack-mount brackets
as shown in Figure 3-5.
Figure 3-5 Telco Rack Installation—Rear Panel Forward
Using the screws you provide, attach the chassis assemblies to the rack as shown in
Figure 3-6.
Figure 3-6 Attaching the Chassis to the Rack—Rear Panel Forward
H1705
Input: 100-240VAC
Freq: 50.60 Hz
Current: 1.2-0.6A
Watts: 40W
0
1
Note: The second bracket attaches to the other side of the chassis.
The brackets can also be installed with the front panel forward.
Input: 100-240VAC
Freq: 50.60 Hz
Current: 1.2-0.6A
Watts: 40W
0
1
H1719
Note: The second bracket attaches to the
rack at the other side of the chassis.
The brackets can also be installed
with the front panel forward.