User guide

B-6 Cisco 2500 Series Access Server User Guide
Upgrading the Boot PROMs
Figure B-3 Extracting and Inserting Boot PROMs
Step 4
Insert each new boot PROM in its socket in the orientation shown in Figure B-4.
Insert the new boot ROMs in their respective sockets so that the beveled edge of
the ROM chip is on the same side as the flat corner on the ROM socket.
Caution Boot PROMs should be installed with the printed label side up. Installing boot
PROMs with the label side down will result in damage to the PROM (see Figure B-4).
PLCC extractor tool
PLCC PROMPLCC extractor slot
PLCC socket
Squeeze here
H1579a
PLCC extractor slot
Squeeze here