Specifications

A-2 Cisco 2500 Series Hardware Installation
Information for European Community Use Only
Connection of Power Supply. The Gateway Server is intended for use when supplied with
power from a supply providing 220-240 VAC, 50/60 Hz up to 5 Amps.
Other usage will invalidate any approval given to this apparatus if as a result it ceases to
comply with BS6301: 1989.
The Cisco 2500 Series is brought into service by the supplier.
Information for European Community Use Only
The ports marked “Ethernet,” “Token Ring,” “Console,” and “AUX” are SELV circuits.
SELV circuits should only be connected to other SELV circuits.
Information for Use in Italy Only
The following information applies to Cisco 2503 series and 2504 series models used within
the country of Italy.
Warnings
AVVERTENZA PER GLI UTENTI DELLA CISCO 2503, 2504 PER
CONNESSIONI ISDN ACCESSO BASICO
“Si raccomanda di spegnere il terminale quallora venisse spostato tra due prese dello stesso
o di differente bus SO.”
WARNING FOR USERS OF THE CISCO 2503, 2504 FOR BASIC ACCESS ISDN
CONNECTIONS
“It is recomended to switch off the terminal equipment when it is moved between two
sockets of the same or different bus.”