Specifications

APPENDIX
Regulatory Compliance A-1
A
Regulatory Compliance
This appendix contains information for customers installing systems in the
United Kingdom, Europe, and Italy. Refer to the section about your location.
Information for United Kingdom Use Only
Cisco Systems declaration of operating conditions:
The Cisco 2500 Series is designed to meet the requirements of NET1 and NET2.
Warnings
Interconnection directly, or by way of other apparatus, of ports marked:
“Safety Warning — See instructions for use”
with ports marked or not so marked may produce hazardous conditions on the network and
that advice should be obtained from a competent engineer before such a connection is
made.
The ports marked “Ethernet,” “Token Ring,” “Console,” and “AUX” have a safety warning
applied to them as follows:
“These ports do not provide isolation sufficient to satisfy the requirement of BS6301;
apparatus connected to these ports should either have been approved to BS6301 or have
previously been evaluated against British Telecommunications plc (Post Office) Technical
Guides 2 or 26 and given permission to attach; any that other usage will invalidate any
approval given to this apparatus.”
This apparatus must be connected to a mains socket outlet with a protective earth contact.