Specifications

Installing the Hardware 2-13
Preparing for External Connections
Figure 2-16 Access Server (Model 2511) Rear Panel
Making External Connections
Following is the procedure for connecting external cables to the router. If your router has
an Ethernet port, begin at Step 1. If it has a Token Ring port, begin at Step 3. If it is a hub
model, begin at Step 4.
Step 1 Connect the Ethernet port to a transceiver as shown in Figure 2-17. If necessary,
extend the Ethernet cable as shown in Figure 2-18.
If your router has a Token Ring port, proceed to Step 3. If your router does not
have a Token Ring port or if you are connecting a hub model, proceed to Step 4.
Step 2 If necessary, extend the Ethernet cable as shown in Figure 2-18. Otherwise,
proceed to Step 3 if your router has a Token Ring port, or to Step 4 if your router
does not have a Token Ring port or you are connecting a hub model.
2
3
45
7
H2825
1
6