Specifications

4-78
Cisco Wireless LAN Controller Configuration Guide
OL-21524-02
Chapter 4 Configuring Controller Settings
Configuring Voice and Video Parameters
Step 8 Click Apply to commit your changes.
Step 9 Reenable all WMM WLANs and click Apply.
Step 10 Choose Network under 802.11a/n or 802.11b/g/n, select the 802.11a (or 802.11b/g) Network Status
check box, and click Apply to reenable the radio network.
Step 11 Click Save Configuration to save your changes.
Step 12 Repeat this procedure if you want to configure video parameters for another radio band (802.11a or
802.11b/g).
Using the GUI to View Voice and Video Settings
To view voice and video settings using the controller GUI, follow these steps:
Step 1 Choose Monitor > Clients to open the Clients page (see Figure 4-31).
Figure 4-31 Clients Page
Step 2
Click the MAC address of the desired client to open the Clients > Detail page (see Figure 4-32).