Specifications

4-24
Cisco Wireless LAN Controller Configuration Guide
OL-21524-02
Chapter 4 Configuring Controller Settings
Installing and Configuring Licenses
Figure 4-10 License Agent Configuration Page
Step 2
Select the Enable Default Authentication check box to enable the license agent, or leave it unselected
to disable this feature. The default value is unselected.
Step 3 In the Maximum Number of Sessions text box, enter the maximum number of sessions for the license
agent. The valid range is 1 to 25 sessions (inclusive).
Step 4 Configure the license agent to listen for requests from the CLM as follows:
a. Select the Enable Listener check box to enable the license agent to receive license requests from
the CLM, or unselect this check box to disable this feature. The default value is unselected.
b. In the Listener Message Processing URL text box, enter the URL where the license agent receives
license requests (for example, http://209.165.201.30/licenseAgent/custom). The Protocol parameter
indicates whether the URL requires HTTP or HTTPS.
Note You can specify the protocol to use on the HTTP Configuration page. See the “Enabling Web
and Secure Web Modes” section on page 2-18 for more information.
c. Select the Enable Authentication for Listener check box to enable authentication for the license
agent when it is receiving license requests, or unselect this check box to disable this feature. The
default value is unselected.
d. In the Max HTTP Message Size text box, enter the maximum size for license requests. The valid
range is 0 to 9999 bytes, and the default value is 0.
Step 5 Configure the license agent to send license notifications to the CLM as follows:
a. Select the Enable Notification check box to enable the license agent to send license notifications
to the CLM, or unselect this check box to disable this feature. The default value is unselected.
b. In the URL to Send the Notifications text box, enter the URL where the license agent sends the
notifications (for example, http://www.cisco.com/license/notify).
c. In the User Name text box, enter the username required in order to view the notification messages
at this URL.