Specifications

4-16
Cisco Wireless LAN Controller Configuration Guide
OL-21524-02
Chapter 4 Configuring Controller Settings
Installing and Configuring Licenses
f. Reboot the controller in order for the priority change to take effect.
g. Click Licenses to open the Licenses page and verify that the ap-count evaluation license now has a
high priority and is in use. You can use the evaluation license until it expires.
Step 3 If you decide to stop using the ap-count evaluation license and want to revert to using an ap-count
permanent license, follow these steps:
a. On the Licenses page, click the link for the ap-count evaluation license that is in use.
b. Choose Low from the Priority drop-down list and click Set Priority.
Note You can set the priority only for ap-count evaluation licenses. AP-count permanent licenses
always have a medium priority, which cannot be configured.
c. Click OK when prompted to confirm your decision about changing the priority of the license.
d. When the EULA appears, read the terms of the agreement and then click Accept.
e. When prompted to reboot the controller, click OK.
f. Reboot the controller in order for the priority change to take effect.
g. Click Licenses to open the Licenses page and verify that the ap-count evaluation license now has a
low priority and is not in use. Instead, the ap-count permanent license should be in use.
Using the CLI to Activate an AP-Count Evaluation License
To activate an ap-count evaluation license using the controller CLI, follow these steps:
Step 1 See the current status of all the licenses on your controller by entering this command:
show license all
Information similar to the following appears:
License Store: Primary License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: 12/0/0
License Priority: Medium
StoreIndex: 1 Feature: base Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 2 Feature: base Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License Count: Non-Counted
License Priority: Low
StoreIndex: 3 Feature: base-ap-count Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License Count: 250/0/0