Specifications

4-15
Cisco Wireless LAN Controller Configuration Guide
OL-21524-02
Chapter 4 Configuring Controller Settings
Installing and Configuring Licenses
Figure 4-6 Licenses Page
The Status column shows which licenses are currently in use, and the Priority column shows the current
priority of each license.
Step 2 Activate an ap-count evaluation license as follows:
a. Click the link for the ap-count evaluation license that you want to activate. The License Detail page
appears (see Figure 4-7).
Figure 4-7 License Detail Page
b.
Choose High from the Priority drop-down list and click Set Priority.
Note You can set the priority only for ap-count evaluation licenses. AP-count permanent licenses
always have a medium priority, which cannot be configured.
c. Click OK when prompted to confirm your decision about changing the priority of the license.
d. When the EULA appears, read the terms of the agreement and then click Accept.
e. When prompted to reboot the controller, click OK.