Specifications

4-117
Cisco Wireless LAN Controller Configuration Guide
OL-21524-02
Chapter 4 Configuring Controller Settings
Configuring and Viewing Location Settings
Max Rogue Client Measure Notify Delay............ 0
Max Client Stats Notify Delay.................... 0
Max Client Stats Notify Delay.................... 0
RFID Measurement Periodic........................ 0
RFID Measurement Immediate....................... 0
SSL Handshake failed............................. 0
NMSP Rx detected con failure..................... 0
NMSP Tx detected con failure..................... 0
NMSP Tx buf size exceeded........................ 0
Reconnect Before Conn Timeout................. 0
Information similar to the following appears for each active connection when you enter the show
nmsp statistics connection command:
NMSP Connection Counters
MSE IP: 171.71.132.107
Connection status: UP
Tx message count Rx message count
---------------- ----------------
WLC Capability: 1 MSE Capability: 0
Service Subscr Rsp: 1 Service Subscr Req: 1
Measure Rsp: 0 Measure Req: 0
Measure Notify: 0
Info Rsp: 0 Info Req: 0
Info Notify: 0
Stats Rsp: 0 Stats Req: 0
Stats Notify: 0
Loc Req: 0 Loc Rsp: 0
Loc Subscr Req: 0 Loc Subscr Rsp: 0
Loc Notify: 0
Loc Unsubscr Req: 0 Loc Unsubscr Rsp: 0
AP Monitor Rsp: 0 AP Monitor Req: 0
AP Monitor Notify: 64677
IDS Get Rsp: 0 IDS Get Req: 0
IDS Notif: 0
IDS Set Rsp: 0 IDS Set Req: 0
• See the mobility services that are active on the controller by entering this command:
show nmsp subscription {summary | detail | detail ip_addr}
where
– summary shows all of the mobility services to which the controller is subscribed.
– detail shows details for all of the mobility services to which the controller is subscribed.
– detail ip_addr shows details only for the mobility services subscribed to by a specific IP
address.
Information similar to the following appears for the show nmsp subscription summary command:
Mobility Services Subscribed:
Server IP Services
--------- --------
1.4.93.31 RSSI, Info, Statistics
Information similar to the following appears for the show nmsp subscription detail ip_addr
command:
Mobility Services Subscribed by 1.4.93.31
Services Sub-services
-------- ------------