Specifications

Installation and Startup 2-37
Accessing the Switch Manager
Configuring Microsoft Internet Explorer 5.0
Note During the installation of this browser, make sure to select the Install Minimal or
Customize Your Browser check box. Then in the Component Options window, in the
Internet Explorer 5 section, make sure to select the Microsoft Virtual Machine check box
so that you can display applets written in Java.
To configure Microsoft Internet Explorer 5.0, follow these steps:
Step 1 Start Internet Explorer.
Step 2 From the menu bar, select Tools > Internet Options.
Step 3 In the Internet Options window, select the Security tab.
Step 4 Select the Trusted sites icon, and click Sites....
Step 5 In the Trusted Sites Zone window, deselect the Require server verification
check box.
(a) In the Add this Web site to the Zone field, enter the IP address of the
switch.
(b) Click Add, and then click OK.
Note If the switch is or will be a cluster member, you do not need to enter its
IP address. However, if the switch does have an IP address and you want to leave
open the possibility of direct management, perform this step.
Step 6 After you have finished entering the URLs for your switches, click OK.
Step 7 While still in the Security tab of the Internet Options window, click Custom
Level....
Step 8 In the Security Settings window, scroll to the Java > Java permissions section.
If you do not see this section, you need to reinstall the browser, and follow the
instructions in the note at the beginning of this procedure.