Specifications

Accessing the Management Interfaces
Catalyst 1900 Series Installation and Configuration Guide
2-36
Step 5 In the Internet Options window, click Security.
(a) In the Zone drop-down list, select Trusted Sites Zone.
(b) In the Trusted Sites Zone section, click Custom.
(c) Click Settings.
Step 6 Select Java > Java Permissions section, and select Custom.
Click Java Custom Setting, which appears at the bottom of the window.
Step 7 In the Trusted Sites Zone window, click Edit Permissions.
(a) If the buttons under Run Unsigned Content are not available, select either
Medium or Low security in the Reset Java Permissions list box. Click
Reset.
(b) Under Run Unsigned Content, select Enable, and click OK.
Step 8 In the Security Settings window, click OK.
Step 9 In the Internet Options window, click Security.
(a) Verify that the Zone drop-down list is set to Trusted Sites Zone.
(b) In the Trusted Sites Zone section, click Add Sites.
Step 10 In the Trusted Sites Zone window, deselect the Require server verification
check box.
(a) In the Add this Web site to the Zone field, enter the IP address of the
switch.
(b) Click Add, and then click OK.
Note If the switch is or will be a cluster member, you do not need to enter its
IP address. However, if the switch does have an IP address and you want to leave
open the possibility of direct management, perform this step.
Step 11 In the Internet Options window, click Apply, and then click OK.