Specifications

Installation and Startup 2-17
Connecting to the Console Port
Step 2 Connect one end of the supplied rollover console cable to the console port, as
shown in Figure 2-9.
Caution Do not connect an actual telephone line, an ISDN line, or an Ethernet cable to
this console port. Damage to the switch can result. Make sure you use the supplied
RJ-45-to-RJ-45 rollover console cable and the appropriate adapter to connect the console
port to the management station or modem.
Figure 2-9 Connecting to the Console Port
Step 3
Attach the appropriate adapter, such as the supplied RJ-45-to-DB-9 female DTE
adapter (labeled Terminal), to a management station or modem.
Note If you are connecting the switch to a Sun workstation (or to a
management station with a female DB-25 serial connector), use a male-to-male
gender changer to attach the supplied RJ-45-to-RJ-45 rollover console cable and
a RJ-45-to-DB-25 female DTE adapter to the management station. You must
provide the gender changer and the DTE adapter because they are not supplied
with the switch.
26635
Supplied RJ-45-to-RJ-45
rollover console cable
CONSOLE
DC INPUT
FOR REMOTE
POWER SUPPLY
SPECIFIED
IN MANUAL.
+5V @6A
+12V @1A
RATING
100-127V~
@0.6A
200-240V~
@0.3A
50-60Hz