Specifications

© Copyright 2007 Cisco Systems, Inc.
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
10
Off AIM1 not installed.
AIM0 Solid Green
Solid Orange
Off
AIM0 installed and initialized.
AIM0 installed and initialized error.
AIM0 not installed.
Table 5 – 2801 Front Panel Indicators
The following table describes the meaning of Ethernet LEDs on the front panel:
Name State Description
Duplex Solid Green
Off
Full-Duplex
Half-Duplex
Speed Solid Green
Off
100 Mbps
10 Mbps
Link Solid Green
Off
Ethernet link is established
No link established
Table 6 – 2801 Ethernet Indicators
The physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in
the following table:
Router Physical Interface FIPS 140-2 Logical Interface
10/100 Ethernet LAN Ports
HWIC/WIC/VIC Ports
Console Port
Auxiliary Port
USB Port
Data Input Interface
10/100 Ethernet LAN Ports
HWIC/WIC/VIC Ports
Console Port
Auxiliary Port
USB Port
Data Output Interface
10/100 Ethernet LAN Ports
HWIC/WIC/VIC Ports
Power Switch
Console Port
Auxiliary Port
Control Input Interface
10/100 Ethernet LAN Port LEDs
AIM LEDs
PVDM LEDs
Inline Power LED
System Activity LED
System OK LED
Compact Flash LED
Console Port
Auxiliary Port
USB Port
Status Output Interface
Power Plug Power Interface
Table 7 – 2801 FIPS 140-2 Logical Interfaces